Duct sensor, Immersion sensor temperature – RS485 Modbus, 0..5 V, 0..10 V
| Application/type |
Duct sensor, Immersion sensor |
| Purpose |
Measure values |
| Measured values |
temperature |
| Interface |
RS485 Modbus, 0..5 V, 0..10 V |
| Configuration |
USEapp, uConfig, BUS, jumper, DIP switches |
| Sensor |
SI-Protection against permeation of humidity and mechanical stress (e.g. vibration) |
| Output voltage |
0..10 V or 0..5 V, live-zero configuration via app or uConfig, min. load 10 kΩ |
| Network technology |
RS485 Modbus |
| Data transmission |
RTU, half-duplex, baud rate 9.600, 19.200, 38.400 or 57.600, parity: none (2 stop bits), even or odd (1 stop bit) |
| Operating range temperature (°C) |
-50..+160 |
| Operating ranges temperature (°C) |
-50..+160 |
| Output signal temperature |
scaling analogue output, -20..+80 °C (default setting), selectable from 4 temperature ranges -50..+50 | -20..+80 | -15..+35 | -10..+120 | 0..+50 | 0..+100 | 0..+160 | 0..+250 °C, optionally configurable |
| Operating range temperature enclosure (°C) |
-20..+70 |
| Operating range humidity |
max. 85% rH short term condensation |
| Accuracy temperature |
±0,5 K (typ. at 21 °C), offset setting via app or uConfig |
| Power supply |
15..35 V = SELV, 19..29 V ~ SELV |
| Power consumption |
max. 2,5 W (24 V =), 4,3 VA (24 V ~) |
| Material in touch with media |
Sensor probe, Ø=6 mm, stainless steel V4A (1.4571), suitable for usage in aggressive media |
| Installation length (mm) |
250 |
| Enclosure |
USE-M, impact- and shock-resistant enclosure with quick-release cover, PC |
| Colour |
pure white |
| Protection (IP) |
IP65, according to EN 60529 |
| Connection |
removable cable entry M25 with fourfold cable entry for wire with max. Ø=7 mm, removable plug-in terminal, max. 2,5 mm², BUS max. 1,5 mm² |
| Mounting |
when used as duct sensors: please use mounting flange MF6DS flexible (+90..+120 °C) or MF6 (brass, +120..+260 °C), for use as immersion sensors please use immersion pocket THVADS / THMSDS |
| Delivery content |
incl. mounting flange MF6DS flexible, incl. mounting set (screws and accessories) |
| Packaging length (mm) |
94 |
| Packaging width (mm) |
94 |
| Packaging height (mm) |
331 |
| Packaging |
case packaging |
| Device length (mm) |
85 |
| Device width (mm) |
84 |
| Device height (mm) |
295 |
Standard Manufacturer's Warranty
- Delivery::
- Worldwide Express Delivery via FEDEX
- Shipping::
- Calculated Before Payment
- Country of Origin::
- EU (Original Part)
- Product Datasheet::
- If not in Description, Available Upon Request