AKF10+ TRV MultiRange 200.06

Duct sensor, Immersion sensor temperature – Active, 0..5 V, 0..10 V

Application/type Duct sensor, Immersion sensor
Purpose Measure values
Measured values temperature
Interface Active, 0..5 V, 0..10 V
Configuration jumper
Sensor SI-Protection against permeation of humidity and mechanical stress (e.g. vibration)
Output voltage 0..10 V or 0..5 V, adjustable via jumper, min. load 5 kΩ
Operating range temperature (°C) -50..+160
Operating ranges temperature (°C) -50..+160
Output signal temperature scaling analogue output, 0..+160 °C (default setting), selectable from 4 temperature ranges -50..+50 | -20..+80 | -15..+35 | -10..+120 | 0..+50 | 0..+100 | 0..+160 | 0..+250 °C, optionally configurable
Operating range temperature enclosure (°C) -35..+70
Operating range humidity max. 85% rH short term condensation
Accuracy temperature ±0,5 K (typ. at 21 °C), potentiometer for offset adjustment
Power supply 15..24 V = (±10%) SELV, 24 V ~ (±10%) SELV
Power consumption typ. 0,4 W (24 V =), 0,8 VA (24 V ~)
Material in touch with media Sensor probe, Ø=6 mm, stainless steel V4A (1.4571), suitable for usage in aggressive media
Installation length (mm) 200
Enclosure USE-S, impact- and shock-resistant enclosure with quick-release cover, PC
Colour pure white
Protection (IP) IP65, according to EN 60529
Connection removable cable entry flextherm M20 for wire Ø=4,5..9 mm, removable plug-in terminal, max. 2,5 mm²
Mounting when used as duct sensors: please use mounting flange MF6DS flexible (+90..+120 °C) or MF6 (brass, +120..+260 °C), or with enclosure USE-S with mounting clip, for use as immersion sensors please use immersion pocket THVADS / THMSDS
Delivery content incl. mounting clip enclosure USE-S pure white, incl. mounting set (screws and accessories)
Packaging length (mm) 70
Packaging width (mm) 70
Packaging height (mm) 250
Packaging case packaging
Device length (mm) 63
Device width (mm) 68
Device height (mm) 240