Differential pressure transducer differential pressure, volume flow, pressure in Pa or inchWC, volume flow in m³/h or cfm, optionally configurable via app or uConfig – RS485 BACnet, 0..5 V, 0..10 V
Application/type |
Differential pressure transducer |
Purpose |
Measure values |
Measured values |
differential pressure, volume flow, pressure in Pa or inchWC, volume flow in m³/h or cfm, optionally configurable via app or uConfig |
Interface |
RS485 BACnet, 0..5 V, 0..10 V |
Configuration |
USEapp, uConfig, jumper, DIP switches |
Sensor |
piezo measuring element |
Output voltage |
2x 0..10 V or 0..5 V, adjustable via jumper, live-zero configuration via app or uConfig, min. load 10 kΩ |
Network technology |
RS485 BACnet (MS/TP) |
Operating range temperature (°C) |
-10..+50 |
Operating ranges temperature (°C) |
-10..+50 |
Operating range humidity |
max. 85% rH short term condensation |
Operating range pressure |
air or other non-flammable/non-aggressive gases, max. 40 kPa |
Measuring range pressure |
0..+7000 Pa (default setting), 0..+1000 | 0..+1500 | 0..+2000 | 0..+2500 | 0..+3000 | 0..+4000 | 0..+5000 | 0..+7000 Pa, selectable at the device |
Accuracy pressure |
±10 Pa at range <2000 Pa, ±25 Pa at range >2000 Pa, deviation from calibration reference device (calibrator) |
Measuring range velocity (ppm) |
0..750.000 m³/h, optionally configurable |
Power supply |
15..35 V = SELV, 19..29 V ~ SELV |
Power consumption |
max. 2,5 W (24 V =), 4,3 VA (24 V ~) |
Display |
LCD 29x35 mm, RGB backlight, with traffic light function, threshold values configurable, optionally configurable via app or uConfig |
Enclosure |
USE-L, impact- and shock-resistant enclosure with quick-release cover, PC |
Colour |
pure white, transparent cover |
Protection (IP) |
IP65, according to EN 60529 |
Connection |
removable cable entry M25 with fourfold cable entry for wire with max. Ø=7 mm, removable plug-in terminal, max. 2,5 mm², BUS max. 1,5 mm², pressure connection male Ø=5,0 mm / Ø=6,3 mm, connection tube: PVC, soft |
Mounting |
surface-mounted flat on base using screws, prepared for mounting on DIN rail TS35 (35x7,5 mm) according to EN 60715 |
Delivery content |
incl. mounting base enclosure USE-L pure white, incl. mounting set (screws and accessories), incl. pressure connection set and 2 m PVC connection hose |
Packaging length (mm) |
152 |
Packaging width (mm) |
128 |
Packaging height (mm) |
65 |
Packaging |
case packaging |
Device length (mm) |
110 |
Device width (mm) |
105 |
Device height (mm) |
48 |
Notes |
output protection circuit (reverse polarity protected) |
Standard Manufacturer's Warranty
- Delivery::
- Worldwide Express Delivery via FEDEX
- Shipping::
- Calculated Before Payment
- Country of Origin::
- EU (Original Part)
- Product Datasheet::
- If not in Description, Available Upon Request