KFK03 TRV1 100.08

Duct sensor, Immersion sensor temperature – Active, 0..10 V

Application/type Duct sensor, Immersion sensor
Purpose Measure values
Measured values temperature
Interface Active, 0..10 V
Sensor SI-Protection against permeation of humidity and mechanical stress (e.g. vibration)
Output voltage 0..10 V, min. load 3 kΩ
Operating range temperature (°C) -50..+50
Operating ranges temperature (°C) -50..+50
Output signal temperature scaling analogue output, -50..+50 °C
Operating range temperature enclosure (°C) -35..+70
Operating range humidity max. 85% rH short term condensation
Accuracy temperature ±0,2 K (typ. at 21 °C) | ±0,1% of measured value (typ. at 21 °C)
Power supply 15..35 V = SELV, 15..26 V ~ SELV
Power consumption max. 1 W (24 V =), 0,8 VA (24 V ~)
Material in touch with media Sensor probe, Ø=8 mm, stainless steel V4A (1.4571), length 108 mm
Installation length (mm) 100
Enclosure shape B, aluminium
Protection (IP) IP66, according to EN 60529
Connection cable entry M20 for wire Ø=7 mm, terminal block, max. 1,5 mm²
Mounting when used as duct sensors: please use mounting flange MF8 stainless steel, for use as immersion sensors please use immersion pocket THVA
Packaging length (mm) 300
Packaging width (mm) 130
Device length (mm) 78
Device width (mm) 70
Device height (mm) 186
Weight (g) 250