Room sensor temperature, relative humidity, absolute humidity, enthalpy, dew point, CO2 – RS485 Modbus
| Application/type |
Room sensor |
| Purpose |
Measure values |
| Measured values |
temperature, relative humidity, absolute humidity, enthalpy, dew point, CO2 |
| Interface |
RS485 Modbus |
| Configuration |
NOVOSapp, uConfig, BUS |
| Input |
1x input for floating contact |
| Network technology |
RS485 Modbus |
| Data transmission |
RTU, half-duplex, baud rate 9.600, 19.200, 38.400 or 57.600, parity: none (2 stop bits), even or odd (1 stop bit) |
| Operating range temperature (°C) |
0..+50 |
| Operating ranges temperature (°C) |
0..+50 |
| Output signal temperature |
0..+50 °C (default setting), selectable from 4 temperature ranges -40..+60 | 0..+50 | -20..+80 | -15..+35 °C -50..+50 | 0..+50 | -20..+80 | -15..+35 °C, optionally configurable |
| Operating range humidity |
max. 85% rH non-condensing |
| Accuracy temperature |
±0,5 K (typ. at 21 °C) |
| Measuring range humidity |
0..100% rH non-condensing, 0..85 KJ/kg enthalpy, 0..50 | 0..80 g/m³ absolute humidity, 0..+50 | -20..+80 °C dew point, optionally configurable |
| Accuracy humidity |
±2% between 10..90% rH (typ. at 21 °C) |
| Measuring range CO2 |
0..2000 ppm, 0..5000 ppm, optionally configurable |
| Accuracy CO2 |
±50 ppm +3% of measured value (typ. at 21 °C, 50% rH, 1015 hPa), self-calibration Dual Channel |
| Power supply |
15..35 V = SELV, 19..29 V ~ SELV |
| Power consumption |
typ. 0,4 W (24 V =), 0,8 VA (24 V ~) |
| Display |
LCD 29x35 mm, RGB backlight, with traffic light function, threshold values configurable, optionally configurable via app or uConfig |
| Enclosure |
PC V0 |
| Colour |
pure white, with design cover alu or black, (please specify colour when ordering) |
| Protection (IP) |
IP30, according to EN 60529 |
| Connection |
tool-free mountable spring clamp, max. 1,5 mm², cable entry via rear opening, predetermined breaking point (bottom) or drilling mark (top) |
| Mounting |
flush-mounted on standard EU box (Ø=60 mm), surface-mounted flat on base using adhesive foil or screws, base part can be mounted and wired separately |
| Packaging length (mm) |
170 |
| Packaging width (mm) |
110 |
| Packaging height (mm) |
45 |
| Device length (mm) |
163 |
| Device width (mm) |
106 |
| Device height (mm) |
25 |
| Notes |
+ surcharge for design cover (mandatory), please select colour |
Standard Manufacturer's Warranty
- Delivery::
- Worldwide Express Delivery via FEDEX
- Shipping::
- Calculated Before Payment
- Country of Origin::
- EU (Original Part)
- Product Datasheet::
- If not in Description, Available Upon Request