SFK02+ RS485 Modbus 100.08

Immersion sensor, Duct sensor temperature – RS485 Modbus, 0..5 V, 0..10 V

Application/type Immersion sensor, Duct sensor
Purpose Measure values
Measured values temperature
Interface RS485 Modbus, 0..5 V, 0..10 V
Configuration USEapp, uConfig, BUS, jumper, DIP switches
Sensor SI-Protection against permeation of humidity and mechanical stress (e.g. vibration)
Output voltage 0..10 V or 0..5 V, adjustable via jumper, live-zero configuration via app or uConfig, min. load 10 kΩ
Network technology RS485 Modbus
Data transmission RTU, half-duplex, baud rate 9.600, 19.200, 38.400 or 57.600, parity: none (2 stop bits), even or odd (1 stop bit)
Operating range temperature (°C) -50..+160
Operating ranges temperature (°C) -50..+160
Output signal temperature scaling analogue output, -20..+80 °C (default setting), selectable from 4 temperature ranges -50..+50 | -20..+80 | -15..+35 | -10..+120 | 0..+50 | 0..+100 | 0..+160 | 0..+250 °C, optionally configurable
Operating range temperature enclosure (°C) -35..+70
Operating range humidity max. 85% rH short term condensation
Accuracy temperature ±0,5 K (typ. at 21 °C), within default measuring range, offset setting via app or uConfig
Power supply 15..35 V = SELV, 19..29 V ~ SELV
Power consumption max. 2,5 W (24 V =), 4,3 VA (24 V ~)
Material in touch with media Sensor probe, Ø=8 mm, stainless steel V4A (1.4571), G1/2", suitable for usage in aggressive media
Installation length (mm) 100
Enclosure USE-M, impact- and shock-resistant enclosure with quick-release cover, PC
Colour pure white
Protection (IP) IP65, according to EN 60529
Connection removable cable entry M25 with fourfold cable entry for wire with max. Ø=7 mm, removable plug-in terminal, max. 2,5 mm², BUS max. 1,5 mm²
Delivery content incl. mounting set (screws and accessories)
Packaging length (mm) 70
Packaging width (mm) 70
Packaging height (mm) 150
Packaging case packaging
Device length (mm) 85
Device width (mm) 84
Device height (mm) 145