WRF06 CO2 temp RS485 Modbus Jung aluminium

Room sensor temperature, CO2 – RS485 Modbus

Application/type Room sensor
Purpose Measure values
Measured values temperature, CO2
Interface RS485 Modbus
Configuration Software/Plug-In for configuration, BUS, jumper, DIP switches
Sensor NDIR (non-dispersive, infrared)
Network technology RS485 Modbus
Data transmission RTU, half-duplex, baud rate 9.600, 19.200, 38.400 or 57.600, parity: none (2 stop bits), even or odd (1 stop bit)
Operating range temperature (°C) 0..+50
Operating ranges temperature (°C) 0..+50
Output signal temperature 0..+50 °C
Operating range humidity max. 85% rH non-condensing
Accuracy temperature ±0,5 K (typ. at 21 °C)
Measuring range CO2 0..2000 ppm
Accuracy CO2 ±50 ppm +3% of measured value (typ. at 21 °C, 50% rH, 1015 hPa), self-calibration Dual Channel
Power supply 15..24 V = (±10%) SELV, 24 V ~ (±10%) SELV
Power consumption max. 1,6 W (24 V =), 3,9 VA (24 V ~)
Enclosure PC, central disc Thermokon (frame selectable)
Colour Jung aluminium
Protection (IP) IP30, according to EN 60529
Connection terminal block, max. 1,5 mm², pluggable, cable entry via rear opening
Switch ranges Jung, (please specify the desired frame when ordering)
Switch range Jung A 500, A 550, A creation, A plus, AS 500, CD 500 with intermediate frame, LS 990 with intermediate frame
Mounting flush-mounted in standard EU box (Ø=60 mm, depth min. 45 mm)
Delivery content incl. frame
Packaging length (mm) 90
Packaging width (mm) 90
Packaging height (mm) 80
Packaging case packaging
Device length (mm) 77
Device width (mm) 77
Device height (mm) 38