AKF10+ Basic RS485 Modbus 100.06

Duct sensor, Immersion sensor temperature – RS485 Modbus

Application/type Duct sensor, Immersion sensor
Purpose Measure values
Measured values temperature
Interface RS485 Modbus
Configuration BUS, DIP switches
Sensor SI-Protection against permeation of humidity and mechanical stress (e.g. vibration)
Network technology RS485 Modbus
Data transmission RTU, half-duplex, baud rate 9.600, 19.200, 38.400 or 57.600, parity: none (2 stop bits), even or odd (1 stop bit)
Operating range temperature (°C) -50..+160
Operating ranges temperature (°C) -50..+160
Operating range temperature enclosure (°C) -35..+70
Operating range humidity max. 85% rH short term condensation
Accuracy temperature ±0,5 K (typ. at 21 °C)
Power supply 15..24 V = (±10%) SELV, 24 V ~ (±10%) SELV
Power consumption max. 0,7 W (24 V =), 1,8 VA (24 V ~)
Material in touch with media Sensor probe, Ø=6 mm, stainless steel V4A (1.4571), suitable for usage in aggressive media
Installation length (mm) 100
Enclosure USE-S, impact- and shock-resistant enclosure with quick-release cover, PC
Colour pure white
Protection (IP) IP65, according to EN 60529
Connection removable cable entry flextherm M20 for wire Ø=4,5..9 mm, removable plug-in terminal, max. 2,5 mm²
Mounting when used as duct sensors: please use mounting flange MF6DS flexible (+90..+120 °C) or MF6 (brass, +120..+260 °C), for use as immersion sensors please use immersion pocket THVADS / THMSDS
Delivery content incl. mounting clip enclosure USE-S pure white, incl. mounting set (screws and accessories)
Packaging length (mm) 70
Packaging width (mm) 70
Packaging height (mm) 150
Packaging case packaging
Device length (mm) 63
Device width (mm) 68
Device height (mm) 140