LCF02 Touch 5DO RS485 Modbus 24 V black

Fan coil thermostat temperature – RS485 Modbus, Switch contact

Application/type Fan coil thermostat, Room controller
Purpose Room Climate Control, Measure values
Measured values temperature
Interface RS485 Modbus, Switch contact
Functions fan control relay, heating + cooling relay, change-over, integrated PI and two-/three-position controller, frost protection, window/door monitoring, presence
Operating functions setpoint adjustment temperature, +16..+30 °C (default setting), optionally configurable, fan stage adjustment, status displays
Operating elements touch screen
Configuration BUS
Output switch contact 2x contact NO, 1x heating, 1x cooling, 3x contact NO, fan stages, load max. 3 A, max. 30 V =, max. 250 V ~
Input 1x input for additional external NTC10k, 1x ESI for window contact, dew point, 1x OCC for presence detection, key card switch
Network technology RS485 Modbus
Data transmission RTU, half-duplex, baud rate 4.800, 9.600, 19.200 or 38.400, parity: none (2 stop bits), even or odd (1 stop bit)
Operating range temperature (°C) -10..+50
Operating ranges temperature (°C) -10..+50
Operating range humidity max. 85% rH non-condensing
Accuracy temperature ±1 K (typ. at 21 °C)
Power supply 24 V = (±10%) SELV, 24 V ~ (±20%) SELV
Power consumption typ. 3 W (24 V =)
Display LCD 64x64 mm, backlight black, touch technology
Enclosure ABS, glass
Colour black
Protection (IP) IP20, according to EN 60529
Connection terminal block, max. 1,5 mm², cable entry via rear opening
Mounting flush-mounted in standard EU box (Ø=60 mm, depth min. 45 mm)
Packaging case packaging
Device length (mm) 86
Device width (mm) 86
Device height (mm) 45