LK+ CO2 100 LCD temp RS485 Modbus

Duct sensor temperature, CO2 – RS485 Modbus, 0..5 V, 0..10 V

Application/type Duct sensor
Purpose Measure values
Measured values temperature, CO2
Interface RS485 Modbus, 0..5 V, 0..10 V
Configuration USEapp, uConfig, jumper, DIP switches
Sensor NDIR (non-dispersive, infrared)
Output voltage 2x 0..10 V or 0..5 V, adjustable via jumper, live-zero configuration via app or uConfig, min. load 10 kΩ
Network technology RS485 Modbus
Radio technology LoRaWAN® (868 MHz)
Data transmission RTU, half-duplex, baud rate 9.600, 19.200, 38.400 or 57.600, parity: none (2 stop bits), even or odd (1 stop bit)
Operating range temperature (°C) 0..+50
Operating ranges temperature (°C) 0..+50
Output signal temperature scaling analogue output, 0..+50 °C (default setting), selectable from 4 temperature ranges -40..+60 | 0..+50 | -20..+80 | -15..+35 °C, optionally configurable
Operating range humidity max. 85% rH short term condensation
Accuracy temperature ±0,5 K (typ. at 21 °C), within default measuring range, offset setting via app or uConfig
Measuring range CO2 0..2000 ppm, 0..5000 ppm, optionally configurable
Accuracy CO2 ±50 ppm +3% of measured value (typ. at 21 °C, 50% rH, 1015 hPa), self-calibration Dual Channel
Power supply 15..35 V = SELV, 19..29 V ~ SELV
Power consumption max. 2,5 W (24 V =), 4,3 VA (24 V ~)
Material in touch with media Pipe, Ø=19,5 mm, black, length 100 mm
Installation length (mm) 100
Enclosure USE-M, impact- and shock-resistant enclosure with quick-release cover, PC
Colour pure white
Protection (IP) IP65, according to EN 60529
Connection removable cable entry M25 with fourfold cable entry for wire with max. Ø=7 mm, removable plug-in terminal, max. 2,5 mm², BUS max. 1,5 mm²
Delivery content incl. mounting flange, incl. mounting set (screws and accessories)
Packaging length (mm) 87
Packaging width (mm) 87
Packaging height (mm) 200
Packaging case packaging
Device length (mm) 85
Device width (mm) 84
Device height (mm) 145
Notes air speed 0,3..12 m/s