MWF+ LCD RS485 Modbus L6000

Duct averaging sensor temperature – RS485 Modbus, 0..5 V, 0..10 V

Application/type Duct averaging sensor
Purpose Measure values
Measured values temperature
Interface RS485 Modbus, 0..5 V, 0..10 V
Configuration USEapp, uConfig, BUS, jumper, DIP switches
Output voltage 0..10 V or 0..5 V, adjustable via jumper, live-zero configuration via app or uConfig, min. load 10 kΩ
Network technology RS485 Modbus
Data transmission RTU, half-duplex, baud rate 9.600, 19.200, 38.400 or 57.600, parity: none (2 stop bits), even or odd (1 stop bit)
Operating range temperature (°C) -50..+80
Operating ranges temperature (°C) -50..+80
Output signal temperature scaling analogue output, -20..+80 °C (default setting), selectable from 4 temperature ranges -50..+50 | -20..+80 | -15..+35 | -10..+120 | 0..+50 | 0..+100 | 0..+160 | 0..+250 °C, optionally configurable via app or uConfig
Operating range temperature enclosure (°C) -20..+70
Operating range humidity max. 85% rH short term condensation
Accuracy temperature ±0,5 K (typ. at 21 °C), within default measuring range, offset setting via app or uConfig
Power supply 15..35 V = SELV, 19..29 V ~ SELV
Power consumption max. 2,5 W (24 V =), 4,3 VA (24 V ~)
Material in touch with media measures the mean temperature value throughout the entire length of the sensor rod
Installation length (mm) 6000
Display LCD 29x35 mm, RGB backlight, with traffic light function, threshold values configurable, optionally configurable via app or uConfig
Enclosure USE-M, impact- and shock-resistant enclosure with quick-release cover, PC
Colour pure white
Protection (IP) IP65, according to EN 60529
Connection removable cable entry M25 with fourfold cable entry for wire with max. Ø=7 mm, removable plug-in terminal, max. 2,5 mm²
Delivery content incl. mounting flange, incl. mounting set (screws and accessories), incl. installation set
Packaging length (mm) 220
Packaging width (mm) 310
Device length (mm) 84
Device width (mm) 85
Device height (mm) 105