NOVOS 3 CO2+VOC white design RS485 Modbus

Room sensor CO2, VOC, CO2/VOC mix – RS485 Modbus

Application/type Room sensor
Purpose Measure values
Measured values CO2, VOC, CO2/VOC mix
Interface RS485 Modbus
Configuration NOVOSapp, uConfig, BUS, jumper, each output can be set to get a variable mix of CO2 and VOC by configuration via app or uConfig, (depending on type)
Input 1x input for floating contact
Network technology RS485 Modbus
Operating range temperature (°C) 0..50
Operating ranges temperature (°C) 0..+50
Operating range humidity max. 85% rH non-condensing
Measuring range CO2 0..2000 ppm, 0..5000 ppm, optionally configurable
Accuracy CO2 ±50 ppm +3% of measured value (typ. at 21 °C, 50% rH, 1015 hPa), self-calibration Dual Channel
Measuring VOC (mixed gas) heated metal oxide semiconductor
Power supply 15..35 V = SELV, 19..29 V ~ SELV
Power consumption typ. 0,4 W (24 V =), 0,8 VA (24 V ~)
Enclosure PC V0
Colour pure white, with design cover alu or black, (please specify colour when ordering)
Protection (IP) IP20, according to EN 60529
Connection tool-free mountable spring clamp, max. 1,5 mm², cable entry via rear opening, predetermined breaking point (bottom) or drilling mark (top)
Mounting flush-mounted on standard EU box (Ø=60 mm), surface-mounted flat on base using adhesive foil or screws, base part can be mounted and wired separately
Packaging length (mm) 115
Packaging width (mm) 105
Packaging height (mm) 30
Packaging case packaging
Device length (mm) 110
Device width (mm) 100
Device height (mm) 23
Notes + surcharge for design cover (mandatory), please select colour