NOVOS 5 temp white design LCD RS485 Modbus

Room sensor temperature – RS485 Modbus

Application/type Room sensor
Purpose Measure values
Measured values temperature
Interface RS485 Modbus
Configuration NOVOSapp, uConfig, BUS
Input 1x input for floating contact
Network technology RS485 Modbus
Data transmission RTU, half-duplex, baud rate 9.600, 19.200, 38.400 or 57.600, parity: none (2 stop bits), even or odd (1 stop bit)
Operating range temperature (°C) 0..+50
Operating ranges temperature (°C) 0..+50
Output signal temperature 0..+50 °C (default setting), selectable from 4 temperature ranges -40..+60 | 0..+50 | -20..+80 | -15..+35 °C -50..+50 | 0..+50 | -20..+80 | -15..+35 °C, optionally configurable
Operating range humidity max. 85% rH non-condensing
Accuracy temperature ±0,5 K (typ. at 21 °C)
Power supply 15..35 V = SELV, 19..29 V ~ SELV
Power consumption typ. 0,4 W (24 V =), 0,8 VA (24 V ~)
Display LCD 29x35 mm, RGB backlight, with traffic light function, threshold values configurable, optionally configurable via app or uConfig
Enclosure PC V0
Colour pure white, with design cover alu or black, (please specify colour when ordering)
Protection (IP) IP30, according to EN 60529
Connection tool-free mountable spring clamp, max. 1,5 mm², cable entry via rear opening, predetermined breaking point (bottom) or drilling mark (top)
Mounting flush-mounted on standard EU box (Ø=60 mm), surface-mounted flat on base using adhesive foil or screws, base part can be mounted and wired separately
Packaging length (mm) 170
Packaging width (mm) 110
Packaging height (mm) 45
Device length (mm) 163
Device width (mm) 106
Device height (mm) 25
Notes + surcharge for design cover (mandatory), please select colour