Siemens 5WG1263-1DB31
N 263D31Binary input, 4 x AC/DC 10…230 V
- Per input one AC or DC contact in the range of 10...230 V
- Per input direct operation function on the device for simulation of input status and indication oft the input status via LED
- Button on the device front for deactivation of the direct mode operation and LED to indicate activation direct mode operation
- Maintenance-free terminals for connection and through-wiring of untreated single-core, stranded or multi-core conductors, 0.5 ... 2.5 mm²
- Max. 100 m length of the connection lines with twisted pair cables
- Bus-powered electronics
- Housing: plastic, color RAL 7035 (light grey), N-system
- DIN rail mounted device for mounting on rail TH35 according to DIN EN 60715
- Type of protection: IP 20
- Max. width 4 MW (1 MW = 18 mm)
Additional functionalities GAMMA
- One input-object per input for sending after change of the switching state
- Adjustable debounce time per input
- Adjustable locking of each input via an corresponding locking object
- Adjustable functions of each input: Send switching state/binary value with adjustable cyclically sending, switch edge, 1-button dimming, 1-button solar protection control, scene control, send values, pulse counting with adjustable threshold value detection, forced control, effect controller, group control, multi-touch control, colour temperature control
- Depending on the selected main function, adjustable further functions, as additional telegram with adjustable transmission delay
- Adjustable functions per pair of inputs: 2-button dimming with stop telegram, 2-button dimming with cyclical transmission, 2-button solar protection control, 2-button value transmission variable, differential counting with adjustable threshold value detection
- Two logic operations per input (AND/OR/NAND/NOR/FILTER/TRIGGER)
- Adjustable transmission time for status objects after bus voltage recovery and transmission delay between status objects
- Adjustable behaviour after download
- Surveillance of device function