USD 
€URO
UK pound
Siemens 5WG1520-4CB23, JB520C23
KNX Shutter Blind Actuator, 1 x AC 120 V, 6 A
- 1 channel
- Electrically interlocked relays to reverse the direction of rotation
- Integrated electronics for detection of the actuation of an electromechanical limit switch and with auto-calibration of the travel time from one limit switch to the other
- Bus-powered electronics
- Integrated bus coupling unit, Bus connection via bus terminal block
- Type of protection: IP 20
- For control of sun protection, door or window drive with a motor for AC 120 V and electromechanical or electronic limit switches per actuator channel
- Relay contacts rated for nominal voltage AC 120 V, 6 A (resistive load)
- As built-in device with 1/2 inch thread connection for mounting to or in a UL/NEMA Junction Box with feedthrough of the function wires through the 1/2 inch threaded connector
Additional functionalities GAMMA
-
Configurable behavior in the event of a bus voltage failure/recovery
-
Automatic mode for sunlight tracking control
-
Manual and standard mode
-
Status: Transmitting status per channel, status position of sun protection, 8-bit, status position of slats, 8-bit
-
Integrated 1-bit/8-bit scene control
-
8 scenes to be integrated per channel
-
Travel lock (e. g. for cleaning the outer shutter/blinds)
-
Separate raising/lowering protection
-
Alarm (Wind, Rain, Frost): Move to safety position, locking in this position for as long as alarm is active
-
Individual configuration of actuator channels
-
Adaptation of objects and functions to drive type
-
Suitable for integration in a sunlight tracking control system
-
End position detection
-
Using position data (8-bit value) for sun protection control (up/down) and slat control (open/closed)
HS Code: 85371091
Coo: Romania
