USD 
€URO
UK pound
Siemens 5WG1525-2SB32
UP 525S32Universal dimmer, 1-fold
- One output for switching and dimming resistive, inductive and capacitive loads
- Automatic or manual adjustment to leading edge or trailing edge control, depending on the type of load
- Electronic protection against open-circuit, short circuit and temperature rise
- Rated contact operating voltage: AC 230 V
- Rated contact frequency: 50/60 Hz
- Power rating: 1...200 W LEDs, 20...230 W conventional lamps
- Screw terminals for connection of untreated single-core conductors, stranded without conductor sleeve 0.5 to 4 mm², stranded with conductor sleeve 0.5 to 2.5 mm²
- 3 binary inputs for potential-free contacts, determination of switching status via voltage generated in the device
- Poll voltage of the inputs: approx. 5 V
- Max. 10 m length of connecting cables, preferably J-Y(St)Y, pre-assembled YY6x0.6
- Bus-powered electronics
- Integrated bus coupling unit
- Mounting in appliance boxes according to DIN 49073 or in mounting case M 592/01 (accessories)
Additional functionalities GAMMA
- KNX Data Secure compatible
- Updateable with Siemens Firmware Download Tool
- Dimming output optionally directly operable via input 1 or input 1 and 2
- Adjustable functions of dimming output: status feedback, adjustable brightness limit values, adjustable dimming curves for optimising the dimming behaviour of lamps, adjustable switch-on and dimming behaviour, adjustable switch-on and switch-off delay, staircase function, scene control, logic operations, operating hours counting, disabling function or forced control, central function
- Message in case of short-circuit, overload/mains voltage failure and type of load
- Adjustable preferred behaviour after download, in case of bus voltage failure and recovery
- Adjustable functions of each input: switching, dimming, colour temperature control, solar protection control, sending values, scene control, pair of inputs operation, controller extension (operating mode switchover, presence function, setpoint shift)
- Adjustable debounce time per input
- Adjustable locking of each input via locking object
- 8 logic functions (logic gate, value converter, disabling element, comparator, limit value switch)
