This Universal Crank Arm is used for linear applications requiring connection to damper shaft when ball joint connection is not possible. Fits shaft sizes 3/8 to 1 inch (9.5 to 25 mm).
To convert linear movement to rotary movement, for mounting on an adjacent acuator shaft
Can be used in connection with ASK71.11, ASK71.13 and ASK71.14
Ball joints for push rod of 8 mm diameter
HS Code: 85030099
Coo: Switzerland
SIEMENS
Siemens RDG100T, S55770-T159 Replaced by Siemens RDG200T Room thermostat, AC 230 V, for fan coil units and universal applications, 7-day time switch, vertical
SIEMENS
Siemens BSG61 Active setpoint adjuster 0…100 %, for flush panel mounting Setpoint adjuster for flush panel mounting 48 x 48 mm, with 2 adjustable stops, for setting or limiting a setpoint or...
Siemens AQE2102 Compression fitting with threaded nipple 1/2"
SIEMENS
Siemens KF8872 Service adapter KF 8872 for LGB... with sensor current measurement
SIEMENS
Siemens QAA910 Siemens QAA910 Wireless room temperature sensor for acquiring the room temperature. During operation, the QAA910 forwards the acquired room temperature to the central apartment unit...
SIEMENS
Siemens RVP361 Replaced By RVP360 S55370-C140 Heating controller for 2 heating circuits and d.h
EUR 
Dollar
UK pound
