TS1 single-phase SP 1-ph 8 A 1,84 kW

Power thyristors

Application/type Power thyristors
Configuration DIP switches
Output voltage reference voltage for potentiometer: 10 V =
Output switch contact signal contact at 100% Ua, 1x contact NO, 3A for 250 V ~ or 24 V =, floating, output for ohmic and inductive loads, 1,84 kW (230 V ~ / 8 A)
Input input for potentiometer 2,5..10 kΩ, electrical activation via setpoint signal 0..10 V = or 0..20 mA, optionally configurable
Operating range temperature (°C) 0..+45
Operating ranges temperature (°C) 0..+45
Power supply L1, N: 230 V ~ 48..62 Hz, self-synchronizing
Power consumption typ. 9 W
Enclosure PA
Protection (IP) IP40, terminal blocks IP23, according to EN 60529
Connection terminal block, max. 2,5 mm²
Mounting prepared for mounting on DIN rail TS35 (35x7,5 mm) according to EN 60715
Device length (mm) 100
Device width (mm) 100
Device height (mm) 110
Notes types 8 A and higher with heat sink and fan
Catalogue table Power thyristors