Siemens 5WG1526-4DB23, RL 526D23

• One relay contact per output as switching element

• Rated contact operating voltage AC 230 V

• Rated contact frequency: 50/60 Hz

• Rated contact current: 6 A

• Control voltage output DC 1-10 V (passive) per channel for controlling dimmable electronic ballasts

• Maintenance-free terminals for connection and through-wiring of untreated single-core, stranded or multi-core conductors, 0.5 ... 2.5 mm²

• Bus-powered electronics

• Housing: plastic

• Dimensions (L x W x H): 86,5 x 47,8 x 36,2 mm

• As built-in device for mounting in a separately to be ordered Control Module Box AP 118 or Room Control Box AP 641

• Type of protection: IP 20

• One switching, one dimming and status object per output

• Selectable operation mode (normal mode, time switch mode, blinking)

• Adjustable ON- and OFF-delay, control value input object, central switching

• Two logic operation (AND/OR/NAND/NOR/EXOR/FILTER/TRIGGER)

• Adjustable dimming time for switching and dimming

• Switch an output on or off by dimming

• Configurable dimming curves

• Maximum and minimum dimming value

• Configurable sending of status objects on request, cyclically, and / or automatically after a change

• Configurable state on bus voltage failure and dimming value on bus voltage recovery

• Night mode for time-limited switching the output, i.e. the lighting, at night,

• Variable On period at night or time switch mode, time limit in timer switch mode, warning signal prior to imminent switching-off

• Manual override, permanent OFF switching, forced control, locking mode

• Counting of operating hours and counting of load cycles with threshold monitoring

• Integrated 8-bit scene control and linking of each output into up to 8 scenes

• Surveillance of device function

HS CODE: 85371091

COO: Romania