Skip to main content

TS3 three-phase SP 3-ph 15 A 10 kW

(No reviews yet) Write a Review
Usually Ships in 48 Hours
Calculated at Checkout
Adding to cart… The item has been added

Power thyristors

Application/type Power thyristors
Configuration DIP switches
Output voltage reference voltage for potentiometer: 10 V =
Output switch contact signal contact at 100% Ua, signal contact in case of fault state, changeover contact, 2A for 230 V ~, output for ohmic and inductive loads, 10 kW (400 V ~ / 15 A)
Input input for potentiometer 2,5..10 kΩ, PWM input 5 V / 5..10 kHz, input for PTC according to DIN 44081, input for reset, electrical activation via setpoint signal 0..10 V = or 0..20 mA, optionally configurable
Operating range temperature (°C) 0..+50
Operating ranges temperature (°C) 0..+50
Operating range humidity max. 95% rH non-condensing
Power supply L1, L2, L3, N: 400 V ~ 45..65 Hz, self-synchronizing
Power consumption typ. 40 W
Display 4 LEDs showing status of the device
Enclosure aluminium
Protection (IP) IP40, according to EN 60529
Connection terminal block
Mounting 4 mounting holes Ø=8 mm for mounting on galvanized mounting plates (control cabinet)
Device length (mm) 139
Device width (mm) 200
Device height (mm) 140
Catalogue table Power thyristors
Standard Manufacturer's Warranty
Worldwide Express Delivery via FEDEX
Calculated Before Payment
Country of Origin::
EU (Original Part)
Product Datasheet::
If not in Description, Available Upon Request